miRider One - Page 20

20
· Always watch out for cars, pedestrians, and other cyclists. Be careful when cycling past
parked cars. Doors may open unexpectedly.
· Avoid potholes, soft or low verges that could cause a crash, or debris which may cause
damage to your tyres.
· Always allow for extended braking distance in adverse weather conditions. Reduce your
speed in adverse weather conditions and/or poor visibility.
· Children must be supervised during installation, use, cleaning, and maintenance to
ensure that children do not play with your e-bike.
· Donotmakemodicationstoyoure-bike.Modicationsreducethelifespanandrisk
damage to your e-bike and are also hazardous to your safety and that of other road
users.
· Do not open the electrical parts or your e-bike. Electrical parts may only be opened by
qualiedservicetechnicianandmayonlyberepairedusingoriginalreplacementparts.
· Always use original spare parts when replacing parts of your e-bike. Third party spare
partsmaynotoperateinthesamewayorbeofthesamequality,whichmayaectthe
safety of your e-bike.
· Do not touch the brake discs without protection. The brake discs have sharp edges and
may become hot after a period of braking.
· Always fully close the frame latch before cycling. If the frame latch is not closed
properly, the frame may fold unexpectedly during cycling.
· Always insert the seatpost at least up to the minimum marking into the frame. Not
inserting the seatpost far enough into the tube may lead to loss of control of your
e-bike during cycling and/or irreparable damage to the seatpost or frame.
· Always adjust the height of the handlebar stem within the indicated range markings.
Placing the height of the handlebar stem above the minimum insertion marking may
lead to loss of control of your e-bike during cycling or failure of the e-bike.