miRider One - Page 21

21
· Always tighten the handlebar stem clamp to prevent the handlebar stem from moving
during cycling.
· Do not adjust the handlebar stem latch yourself without professional advice. Incorrect
adjustment may cause the frame to fold unexpectedly during cycling.
· Always tighten seatpost height adjustment clamp to prevent the seatpost from moving
during cycling.
· Always tighten the seatpost clamp to prevent the seatpost from rotating or moving
during cycling.
· Always tighten the saddle bolts to prevent the saddle from tilting or sliding on the rails
during cycling.
· Always tighten the handlebar stem lock latch to prevent the handlebar stem from
turning during cycling.
· Always tighten the handlebar clamp to prevent the handlebar from rotating or moving
during cycling.
· Do not extend the handlebar stem above the minimum insertion marks. Extending the
handlebar stem higher than the minimum insertion marks may lead to loss of control
of your e-bike during cycling or damage to the cabling.
· Always remove the battery from the frame before inspection, repair, adjustments,
maintenance, storage, or transporting your e-bike by car or aircraft.
· Always keep the battery and the charger away from rain and moisture. Water may
causeanelectricshock,re,and/orexplosionhazard.
· Always remove the battery from the e-bike before cleaning. Water may cause an
electricshock,re,and/orexplosionhazard.
· Do not charge the battery in the frame when the e-bike is wet. Water may cause an
electric shock hazard.