Mirion Technologies LDM 320 - Normal Operating Mode; Specific Mode; Test Modes; Downloading and Programming Mode

2.4.1. Normal Operating Mode
This is the reader operational functioning mode. In this mode the reader operates as a slave
to the PC:
It retrieves the PC commands.
It searches for dosimeters.
It runs the commands (reading or writing dosimeter information or parameters).
It sends a report to the PC.
2.4.2. Specific Mode
This mode is reserved for specific autonomous applications.
2.4.3. Test Modes
These test modes are intended to check reader integrity (Factory use only.)
"Antenna tuning" test mode
"AGC programmable amplifier" test mode
"Autonomous" test mode
MMI and digital input/output test mode
2.4.4. Downloading and Programming Mode
This mode is used to update the reader firmware (Factory use only.)
LDM 320 Description
150532EN-C
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C.
5