3.2.3. Installation of LDM 320 for Windows Seven
The USB driver for the LDM 320 must be installed for Windows Seven.
Drivers are available on request from Mirion Technologies (MGPI) or by downloading it from
the following address:
http://www.mirion-hp.com/support
Once the file is recovered uncompress the file into a folder.
Connect the LDM 320 to a USB port. The computer will recognize a new device.
Note: If Windows does not self start any installation procedure, open the Device Manager and
apply the following procedure to install the driver.
Right-click on "Dual RS232" and then "Update Driver.”
Search for the downloaded and uncompressed driver and then click "Next."
Installation, Connection and Start-up LDM 320
12
Publication, traduction et reproduction totales ou partielles de ce document sont rigoureusement interdites, sauf autorisation écrite de nos services.
The publication, translation or reproduction, either partly or wholly, of this document is not allowed without our written consent. Format 112175C.
150532EN-C