Checking Your Stay Times
At that time, the unit may pass into
the Low Rate Alarm region
depending on the set point. See above
instructions for clearing this alarm.
• Clearing the Low Dose Alarm
Press the CLR/TEST key to turn off
the vibrator and the audio alert.
The visual alerts will continue until
the integrated Dose is reset to 0.
To turn off the visual alerts, you’ll
have to clear the dose memory. See
Clearing the Accumulated Dose on
page 13.
• Clearing the High Dose Alarm
Press the CLR/TEST key to turn off
the vibrator.
The visual alerts will continue until
the integrated Dose is reset to 0.
To turn off the alerts, you’ll have to
clear the dose memory. See Clearing
the Accumulated Dose on page 13.
11
To Next Page
Loading...
