Appendix A Specifications
At operating temperatures below -22°F (-
30°C), it takes somewhat longer for characters
to form on the display. The UltraRadiac-Plus
automatically corrects for this by sensing the
ambient temperature and increasing display
refresh time from two to five seconds.
Operation of the UltraRadiac-Plus is
otherwise unchanged. Measurement is still
accurate and audible and vibrating alarms are
still functional even with the slower display
refresh rate at low temperatures.
STORAGE/TRANSPORT TEMPERATURE:
–40°F to 158°F (–40°C to +70°C).
HUMIDITY – Functions correctly over RH
40% to 93% at 95°F (35°C).
WATER IMMERSION (including salt water)
– 3 ft (1 m) for at least 2 hr.
SAND/DUST – Operates in winds with
exposure to fine dust and sand particles.
FUNGUS – Built from fungus resistant
materials.
VIBRATION AND SHOCK – Withstands
vibration associated with transport and shocks
of dropping while in use.
62
To Next Page
Loading...
