Page | 14 © Mitchell & Johnson UK 2015 WLD+211 IB Ver 1.0 Rev 0.0
Error/Information screens give specific messages
for a few seconds, then change automatically to
another screen.
Mode list screen – to display all the available modes for
user selection.
Menus
The WLD+211T has basically three types of menu. Use
the Control Selector or Select control on the remote to
step through and select options. A scroll bar on the right
of the screen shows if there are further options above or
below those visible.
Each mode has a Mode menu, with options specific to
that mode. For example, the FM mode menu has just
two options: Scan setting and Audio setting.
In addition, each mode menu has two final options:
System settings > and Main menu >.
The ‘>’ indicates options leading to further menus.
The System settings menu allows access to system
settings and information such as network, time,
language and software update. Menus with more
options than will fit on one screen have a scroll bar to
the right. The Main menu allows access to all modes
plus sleep and timer functions.
The Main menu allows access to all modes plus sleep
and timer functions.
Some menus, for example the System settings menu,
have several submenus. See the Modes and menu
overview map on page 15.
To Next Page
Loading...