Page | 18 © Mitchell & Johnson UK 2015 WLD+211 IB Ver 1.0 Rev 0.0
Completion
The WLD+211T attempts to connect to the selected
network.
If connecting fails, the WLD+211T returns to a previous
screen to try again.
If the network connection is lost, the WLD+211T will
automatically attempt to reconnect.
If network connection is successful the Connected
screen will appear.
Upon completion of the process the Setup Wizard
confirms connection and setup up has been successful
Networks
The WLD+211remembers the last four wireless
networks it has connected to, and automatically tries to
connect to whichever one of them it can find.
You can see the list of registered networks through
Menu > System settings > Network > Network profile
>.
From here you can delete unwanted networks by
turning and pressing Select then confirming delete Yes.
There are also other options for viewing and manually
altering network settings from
Menu > System settings > Network >
(for example setting up a wired network).
Users experienced with networking may find these
options useful for diagnosing and fixing network
problems.
Language
The default language is English. To change, select
Menu > System settings >Language >
then select your language.
To Next Page
Loading...