Page | 41 © Mitchell & Johnson UK 2013 WLD+211 IB Ver 1.0 Rev 0.0
15. Software update and factory reset
Software update
From time to time, Mitchell & Johnson may make software updates available with upgrades and/or
additional features. You can either check manually, or set WLD+211 to check periodically automatically (this
is the default). If the WLD+211 detects that newer software is available, it asks if you want to go ahead with
an update. If you agree, the new software is then downloaded and installed. After a software update, all
user settings are maintained.
CAUTION: Before starting a software update, ensure that the WLD+211 is plugged into a stable mains power
connection. Disconnecting power during a software update may permanently damage the unit.
To turn automatic checking on or off, select
Menu > System settings > Software update > Auto-check setting.
Factory reset
A factory reset resets all user settings to default values, so time/date, network configuration and presets are
lost. However, the radio’s current software version is maintained, as is registration with the Internet radio
portal. Internet radio favourites therefore remain unless you re-register your radio with another account on
the portal website.
To perform a factory reset, select
Menu > System settings > Factory reset
Proceed > Yes.
To Next Page
Loading...