Mitel 3000 Administrator's Manual

Mitel 3000
Administrator’s Manual
• Select the extensions whose calls are not to be logged. The selected extensions will be indicated with a
“♦”.
Press the speakerphone key to finish programming.
To Set the Call Logging Interface Speed
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Press the Scroll Down key () until “Set v24 Baud Rate” is displayed.
• Select “Set v24 Baud Rate”.
• Select the speed you require - 4800, 9600,19,200, 38,400 or 115,200 bps.
Press the speakerphone key to finish programming.
Note: To connect a printer or PC for call logging, use the call logging cable provided and connect one end
to the V24 interface on the Central Control Unit (CCU) and the other end to the serial device, (e.g. a PC or
a printer).
100

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English