Mitel 3000 Administrator's Manual

Mitel 3000
Administrator’s Manual
To Program an Extension for use with a Public Address Amplifier
An extension with a Public Address amplifier connected must first be programmed for use with a PA
amplifier.
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Press the Scroll Down key () until “PA Amplifier” is displayed.
• Select “PA Amplifier”.
• Select “PA Equipped”.
• Select the extension to which PA system is connected.
Press the speakerphone key to finish programming.
Note: The extension that has been programmed as the Programming extension will not be displayed as an
option on the screen.
Note: The extension that has been programmed as the PA extension will be indicated by “
 ” next to the
extension.
81

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English