EasyManuals Logo

Mitel 3000 Administrator's Manual

Mitel 3000
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
Mitel 3000
Administrator’s Manual
Break Supervision
This CO type of line should be programmed if your line is supervised. This means that the exchange will
send a signal to the called party if the caller party did not hang up.
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key () until “System Programming” is displayed.
Select “System Programming”.
Enter the System Programming Password and select “Lines”.
Press the Scroll Down key () until “PSTN Programming” is displayed.
Select “PSTN Programming”.
Press the Scroll Down key () until “Break Supervision” is displayed.
The Lines with Break Supervision line programmed are indicated with a “”.
Press the speakerphone key to finish programming.
Reversal on Answer
This CO type allows users to identify that a call has been answered. This facilitates the management of
the duration of the call at the time of a call.
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key () until “System Programming” is displayed.
Select “System Programming”.
Enter the System Programming Password and select “Lines”.
Press the Scroll Down key () until “PSTN Programming” is displayed.
Select “PSTN Programming”.
Press the Scroll Down key () until “Reversal on Answer” is displayed.
The Lines with Reversal on Answer line programmed are indicated with a “”.
Press the speakerphone key to finish programming.
Enhanced Emergency Service E911
In some states it is a requirement that the extension that dialed an emergency number is identified to the
Emergency Services. This is achieved by setting the E 911 service on for the system.
From the Programming extension, press the PROGRAM key.
Press the Scroll Down key () until “System Programming” is displayed.
Select “System Programming”.
Enter the System Programming Password and select “System”.
Press the Scroll Down key () until “911& extension number” is displayed.
Select the “On” option.
Press the speakerphone key to finish programming.
115

Table of Contents

Other manuals for Mitel 3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitel 3000 and is the answer not in the manual?

Mitel 3000 Specifications

General IconGeneral
BrandMitel
Model3000
CategoryTelephone System
LanguageEnglish

Related product manuals