Mitel 3000 Administrator's Manual

Mitel 3000
Administrator’s Manual
Setting up Remote Notification to a Pager
To program a pager to receive the remote notification call two numbers must be programmed, the number
to contact the pager company and the digits that are sent to the pager company once they have answered the
call (dial string).
Programming the pager number and the pager dial string
• Press the MESSAGE key.
• Select “Voice Messaging”.
• Enter your extension number (which is your voice mailbox number).
• Enter your voice mail password (1111 by default) followed by #.
• Select “Remote Notification”.
• Select “Programming”.
• Select “Pager Number”.
• Select “Change”.
• Enter the number.
• Press “Confirm”.
• The menu updates to allow the dial string to be entered. Press “Change”.
• Enter the digits required by the pager company .
• Press “Confirm”.
To complete the programming select whether all messages or priority messages should be notified and turn
remote notification on as described above in programming personal numbers.
From a standard phone dial 4321 to enter the pager number and dial string.
Selecting the Extensions that can activate Remote Notification
In default no extension can set remote notification. Those extensions that can set remote notification are
programmed in system programming.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “Extensions”.
• Select “Remote Notification”.
• Select the extensions that are to be allowed to record calls.
Selecting the Number of Simultaneous Calls
The number of simultaneous remote notification calls can be set at 1 or 2.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Remote Notification”.
• Select “Simultaneous Calls”.
• Enter the value 1 or 2 and press “Confirm”.
The default value is set at 1.
Selecting the Number of Retry Attempts
The number of simultaneous remote notification calls can be set at 1 or 2.
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Remote Notification”.
67

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English