Mitel 3000 Administrator's Manual

Mitel 3000
Administrator’s Manual
If a number or an incoming call matches a number in the System Speed-Dial list, the name in the list will
be displayed.
Note: Up to 24 digits can be stored in any location. A name of up to ten characters, including spaces, can
be used for each entry.
Note: When programming a speed-dial number, you can insert a pause of 1.5 seconds between digits by
selecting “Pause” on the display.
Note: System Speed-Dial numbers cannot be programmed from a standard analog phone.
To Change the System Speed-Dial Password
• From the programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Select “Change Password”.
• Select “Speed Dial Password”
• Select “Change” and enter a four-digit number.
• Select “Confirm”.
To Dial a Personal Speed-Dial Number
• Press the DIRECTORY key.
• Select “Personal Speed Dial” to access your personal speed-dial list.
• The entries are sorted alphabetically.
• Enter the first letter of the name.
• Use the Scroll Down key () to move down the list. A line will automatically be selected and the
number dialed.
To dial a Personal Speed-Dial number from a standard phone:
• Lift the handset.
• Dial the code 74.
• Dial the location (01 - 30) of the number. The number is automatically dialed.
Note: By dialing the code 74 from a digital telephone the Scroll Up and Down keys can be used to view all
the locations in location sequence.
To Dial a System Speed-Dial Number
• Press the DIRECTORY key.
• Select “System Speed Dial”.
• Enter the first letter of the name or scroll through the entries to find the entry you want.
• When you have selected the number or name you want a free line is automatically selected and the
number is dialed.
Note: If some numbers are entered without names, they are presented at the end of the list.
To dial a System Speed-Dial number from a standard analog phone
• Lift the handset.
• Dial the location code (8001 – 8500) of the number you wish to access. The number is automatically
dialed.
Note: By dialing the code 8 from a Feature Phone the Scroll Up and Down keys can be used to view the
numbers in the list.
37

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English