Mitel 3000 Administrator's Manual

Mitel 3000
Administrator’s Manual
To Change the Ringing Time before Calls Hear the Auto-Attendant Greeting
You can change the time that a call will ring before being automatically answered by the Auto-Attendant. A
different time can be set for day and night modes as follows:
• From the Programming extension, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password and select “System”.
• Press the Scroll Down key () until “Timers” is displayed.
• Select “Timers”.
• Press the Scroll Down key () and select “Auto Attendant Day” to change the timer used when the
system is in day mode or “Auto Attendant Night” for the timer used in night mode.
• Enter the time required in seconds (04 - 30).
• Press “Confirm”.
Press the speakerphone key to finish programming.
Note: If the value is set to 4 seconds calls to the Auto Attendant are answered immediately.
54

Mitel 3000 Specifications

General

Brand	Mitel
Model	3000
Category	Telephone System
Language	English