Mitel 5312 - Changing Volume Levels; Changing the Ring Tone; Adjusting the Display Contrast

Mitel
®
5312/5324 IP Phone User Guide – Issue 3, February 2011 Page 15
Personalizing Your Phone
Changing Volume Levels
You can change the following volume levels:
 Ringer (alerting tone)
 Handset
 Headset
 Background music
 External speaker
You must be using the feature to change the volume level. For example, if you want to change
the handset volume level, you must be using the handset. However, you can adjust the ringer
(alerting tone) volume level when the IP phone is idle.
To change a volume level:
While using the feature, press (Up) to increase the volume or press (Down) to
decrease the volume. The volume level is automatically saved.
Changing the Ring Tone
You can select one of nine different ring tones.
To change the ring tone:
1. With the handset on-hook, dial 398.
2. Do one of the following to listen to (or turn off) ring tones:
 Press 0 to turn the ringer off.
 Press (Up) or (Down) or 1 to 9 to listen to ring tones.
 Press (Speaker), #, or lift and replace the handset to select the ring tone.
Adjusting the Display Contrast
You can adjust the display Contrast setting.
To adjust the Contrast setting:
1. While the handset is on-hook, dial 303.
2. Do one of the following to adjust the contrast:
 Press (Up) or (Down) to adjust the contrast.
 Press a number on the dialpad (1 = lightest, 10 = darkest) that corresponds to your
desired contrast level.
3. To save the setting, press # or (Speaker).
NOTE
Turning the external speaker volume down to the lowest levels may prevent you
from hearing the feature “warning tones” that notify you when errors occur (for
example, when you enter an incorrect feature code).