Mitel 5312 - Changing Your Station Passcode

Call Features
Page 56 Mitel
®
5312/5324 IP Phone User Guide – Issue 3, February 2011
Changing Your Station Passcode
You can use Remote Programming to change the station (phone) passcode. See page 50 for
details on setting up a station passcode for your extension.
To change the station passcode using Remote Programming:
1. Do one of the following:
 Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
 Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #.
5. Dial 392.
6. Enter the new passcode followed by
#.
7. Enter the new passcode again followed by #.