Mitel 5312 - Using Configuration Assistant; Changing Your Station Passcode

Call Features
Page 50 Mitel
®
5312/5324 IP Phone User Guide – Issue 3, February 2011
Using Configuration Assistant
If Configuration Assistant is enabled for your system, you can access this voice guided
configuration portal that provides easy-to-use, remote access to the following phone
configuration options:
 Dynamic Extension Express (see page 54)
 DND (see page 52)
 Manual Call Forwarding (see page 52)
 Meet-Me Conferencing (see page 53)
Changing Your Station Passcode
Before using Configuration Assistant, Mitel recommends that you change your default station
(phone) passcode to something more secure.
To change your station passcode:
1. Dial 392. ENTER PASSCODE appears.
2. Enter your current passcode (the default passcode is your extension number), followed
by #. CHANGE PASSCODE TO appears.
3. Enter the new passcode followed by
#. VERIFY PASSCODE appears.
4. Enter the new passcode again followed by #. DATABASE UPDATED appears.
To change the passcode from another phone, see “Changing Your Station Passcode” on
page 56.
NOTE
You need a Configuration Assistant extension number to use this feature. Contact
your system administrator for more information.