Mitel
®
5312/5324 IP Phone User Guide – Issue 3, February 2011 Page 23
Personalizing Your Phone
Viewing Button Assignments
You can view programmable button (key) feature assignments.
To view button assignments:
1. With the handset on-hook, dial 396. PRESS THE KEY TO REVIEW appears.
2. Press any of the feature buttons to display the assignment.
3. Press # or (Speaker) to exit.
Resetting Programmable Buttons
You can reset all buttons (keys) that you have programmed to the default assignments.
Resetting the programmable buttons does not reset button assignments programmed by the
system administrator.
To reset the feature buttons to the default values:
With the handset on-hook, dial 395. FEATURE KEYS DEFAULTED appears.
Ring Intercom Always – On/Off 35 377
Ring Tone Selection 15 398
Station Monitor 66 321
Station Speed Dial 30 382
Station Speed Dial – Programming 30 383
Steal Call 66 387
System Forward – Off 38 353
System Forward – On 38 352
System Forward – On/Off 38 354
System Speed Dial 30 381
Switch Keymap 24 399
Transfer To Hold 37 346
Transfer To Ring 37 345
View Programmable Button Assignments 23 396
Feature Page Code New Code
To Next Page
Loading...
