Mitel 5312 - Changing the DND Settings; Changing the Manual Call Forwarding Settings

Mitel
®
5312/5324 IP Phone User Guide – Issue 3, February 2011 Page 55
Call Features
Changing the DND Settings
See “Using Do-Not-Disturb (DND)” on page 59 for more information about using DND.
To turn on DND using Remote Programming:
1. Do one of the following:
 Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
 Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See page 50 for details on setting up a
station passcode for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND using Remote Programming:
Follow steps 1. through 4. above, and then dial 371.
Changing the Manual Call Forwarding Settings
See “Manual Call Forwarding” on page 38 for more information about Manual Call Forwarding.
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
 Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
 Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See page 50 for details on setting up a
station passcode for your extension.
5. Dial one of the following Call Forwarding feature codes:
 355 (All)
 356 (No answer)
 357 (Busy)
 358 (No Answer/Busy)
6. Enter either an extension number or (8) followed by a phone number.
To turn off Call Forwarding using Remote Programming:
Dial 355, and then hang up.