Mitel 5324 User Guide Supplement

Using the Handoff Feature
Mitel
®
5000 CP Phone User Guide Supplement for v3.2, September 2009 Page 11
Using the Handoff Feature
Personal Call Routing also includes the Handoff feature that allows you to “push” calls from your
main extension to your associated destinations, and “pull” calls from your mobile and home
phones back to your main extensions (see page 9).
To use the Personal Call Routing – Handoff “push” feature:
1. While on an active call, press the Special button, and then dial 388. HANDOFF IN
PROGRESS appears on the display and the call rings all of your associated destinations
(except voice mail).
2. Answer the call at one of your associated destinations. For mobile and home phones,
press # to accept the call.
To use the Personal Call Routing – Handoff “pull” feature:
While on an active call on your mobile or home phone, go off hook at your main
extension and dial 388. A confirmation tone is played and the call is pulled back to the
main extension.
To cancel the Personal Call Routing – Handoff feature:
While the handoff is in-progress, do one of the following:
• Press the Special button, and then dial 388.
• Press the CANCEL HANDOFF menu button.
HANDOFF CANCELLED appears on the display for your main extension.
Using Remote Programming
You can use Remote Programming (feature code 359) to enable or disable the Personal Call
Routing feature from another system or an external phone. To use Remote Programming from
an external phone, your system administrator must program a Direct Inward System Access
(DISA) number for your main extension.
To use Remote Programming to enable Personal Call Routing:
1. Do one of the following:
• Call the DISA number. If necessary, enter the DISA password.
• Use any phone on the system.
2. Dial 359.
3. Enter your main extension number.
4. Enter your password followed by #.
5. Dial 363 (Personal Call Routing On).
To use Remote Programming to disable Personal Call Routing:
Follow steps 1 - 4 above, dial 362 (Personal Call Routing Off), and then hang up.

Mitel 5324 Specifications

Processor and Memory

processor type	TNETV1055 (MIPS)
processor speed	125 MHz
DSP speed	165 MHz
RAM	16 MB
ROM	8 MB

Weight and Dimensions

dimensions (phone only)	9.1 in x 7.5 in x 3.5 in (23 cm x 19 cm x 9 cm)
weight (phone only)	1.65 lbs or 0.75 kg
dimensions (packaged)	9.8 in x 8.3 in x 3.9 in (25 cm x 21 cm x 10 cm)
weight (packaged)	2.49 lbs or 1.13 kg