Mitel 6863i - Redial Key

Mitel 6863i SIP Phone Release 4.0.0 SP1 User Guide
78
REDIAL KEY
By default, the Redial key is programmed on Key 2. However, using the Mitel Web UI, you can
reassign the Redial key to any of the three programmable keys on the phone.
The Redial List is a stored log of your outgoing calls. You can use the Redial key to access a
list of the most recent calls you placed.
CONFIGURING A REDIAL KEY
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3.
3. In the Type field, select Redial.
4. Click Save Settings.
Note: For more information about the Redial functionality, see “Redial” on page 91.
MITEL WEB UI
Redial List Key