Mitel 6863i - Transfer Key

Mitel 6863i SIP Phone Release 4.0.0 SP1 User Guide
80
TRANSFER KEY
By default, the Transfer key is programmed on Key 3. However, using the Mitel Web UI, you
can reassign the Transfer key to any of the three programmable keys on the phone
.
CONFIGURING A TRANSFER KEY
1. Click on Operation > Programmable Keys.
2. Select from Key 1 through Key 3.
3. In the Type field, select Transfer.
4. Click Save Settings.
Note: For more information about transferring calls, see “Transferring Calls” on page 95.
MITEL WEB UI
Transfer Key