UC360 Administration Guide
Tools and Features
This menu allows the administrator to enable or disable a number of network-related protocols.
• DHCP: It is recommended that this be enabled.
• CDP: It is recommended that this be enabled.
• LLDP: It is recommended that this be enabled.
• 802.1x: If the administrator wants authentication performed before allowing network access,
then this should be enabled.
• Enable Firewall Filter: It is recommended that the firewall filter be enabled.
• VLAN Enabled: When this check box is on, VLAN tagging information (if available) will be
obtained from the various sources. When the check box is off, no VLAN tagging information
will be used. (The default value is for Enable VLAN to be off.)
• Ping Test IP Address: Allows a user to ping a network IP address.
• DCHP Trace: Allows a user to perform a DCHP trace.
See the UC360 Engineering Guidelines for details on these options.
To Next Page
Loading...
