DSCP Signaling
This screen allows the administrator to set the L3 priority for Signaling packets. A value of 24
is recommended. For further details, see section on UC360 Quality of Service Settings.
DSCP Multimedia
This screen allows the administrator to set the L3 priority for Multimedia packets. A value of 34
is recommended. For further details, see section on UC360 Quality of Service Settings.
Software HTTP Server
The location of the server used for the software upgrade files.
Configuration HTTP Server
The location of the configuration server used for mass deployment configuration files.
DNS Server 1
This is the IP address (IPv4) of the first DNS server.
IPA Server
This is the IP address (IPv4) of the IPA server. The IPA (IP Phone Analyzer) is a Mitel product
that can be used to assist with debugging phone and network issues.
Modify Static
Modify these values based on your network requirements.
802.x Protocol
802.1X Settings can be set as required or left blank.
Hardware
No changes required.
To Next Page
Loading...
