1Overview
Features 1-2
1.2 Features
(1) Fulfilling functions to monitor and operate robot from GOT. Advances T/B and PC-less solution.
→ Various functions can be performed by reading/ writing the data in CPU buffer memory from GOT.
● Allows you to check activities, position information, and setting values of operation control command and
thereby analyze the operation in case of debugging or problem. (Monitoring current and aimed positions,
activities, and operation control setting values)
● Allows you to read and write the contents of program and variables and thereby change the robot's oper-
ation in case of debugging or problem.
● Allows you to check and set up maintenance status.
● Allows you to check error's detailed content. (Reading error information)
● Allows you to display and check various information in the robot (product, servo information, etc.)
To Next Page
Loading...
