Mitsubishi Electric CR800-D Series - Predictive Maintenance Function Tree; Total Score Screen Overview; Consumption Degree Calculation Screen; Abnormality Detection Screen

6-37How to Operate Maintenance
6Set up Robot's Maintenance
6.3.2 Timing Chart
Fig.6-1:Maintenance function timing chart
(1) The GOT sets up necessary data of "Function number" and "Setting data" and turns ON "Request for
maintenance setting."
(2) When the robot received "Request for maintenance setting ON," the robot operates the maintenance
setting based on received data. When "Function number", "Setting data", and "Completion status"
are specified after the operation, the robot turns ON "Maintenance setting completed."
When the operation cannot be carried out, the robot specifies a number indicating NG and turns ON
"Maintenance setting completed."
(3) When "Maintenance setting completed ON" is received, the GOT turns OFF "Request for mainte-
nance setting.”
(4) When "Request for maintenance setting OFF" is received, the robot turns OFF "Maintenance setting
completed" and clears the data.
(1) (2) (3) (4)
Seque Robot
Function No
Request for
maintenance setting
Maintenance setting
completed
(Setting data)
Function No
(Setting data)
Completion
status
GOT Robot