3-57 Outside dimensions/Installation dimensions
3 Controller
Fig.3-16 ： Cable lead-in and dimension of the controller （CR3D-700 Series）
Capcon installing panel
Left side drawing
Front drawing
Right side drawing
Cable lead in port
(1) Left surface input power supply
lead-in port
(2) Bottom surface input/output signal
lead-in port (with sponge)
(3) Left surface cable outlet
(4) Right surface input/output signal
lead-in port
(no sponge, with cabl fixing plate)
・Use (1) to lead in the input
power cable.
・Use (2) or (4) to lead in the
input/output signal cable.
40
（45）
(39)
90
5
5
□40×90
67
φ34
φ28
45
199
□40×81
36
273
Enlarged view of A section
(4)
(1)
(3)
(2)
Bottom view
<figure is CR3D-711M>
<CR3D-700 series>
Note) As for CE specification, the transformer box is installed in the controller bottom. Refer to Fig. 3-10
To Next Page
Loading...
