3 Controller
Emergency stop input and output etc. 3-66
Fig.3-20 ： Connection of the special-stop-input
安全ユニット
（
R700SFT）
SKIP
<CR3D-700>
1A
2A
3A
4A
1B
2B
3B
4B
専用停止入力コネクタ（SKIP）
電線差込口（AWG#24-18）
マイナスドライバ差込口
Special stop connector
Minus driver plug area
Electric wire plug area(AWG#24-18)
<The connector connection method>
The electric wire skins covering 7mm.
In the condition that the minus driver is inserted, insert the electric wire, and remove the
minus driver.
The electric wire is locked by the connector.
Safty unit
*Please connect after removing the
contact capacity seal currently
stuck on the connector.
SKIP
<CR2DA-700>
To Next Page
Loading...
