Mitsubishi Electric MELSEC iQ-F Series - Chapter 1 Preparation; Applicable Models; Operation Flow Diagram

9
1 PREPARATION
1.1 Applicable Models
1 PREPARATION
1.1 Applicable Models
The following models can be used for a series of operations described in this manual.
*1 The MR-JET-G-N1 cannot be used.
*2 The MR-J5-G-N1 and the MR-J5W cannot be used.
1.2 Operation Flow Diagram
Programmable controller Servo amplifier
(Ethernet-compatible)
FX5S CPU module FX5UJ CPU module FX5U CPU module FX5UC CPU module FX5-ENET MR-JET-G
*1
MR-J5-G
*2
1. Preparing the required products 2. Setting the servo amplifiers 3. Setting the programmable
controller
4. Checking the communication
status
5. Creating programs and checking the operation
Ethernet
MR Configurator2MR Configurator2
Ethernet
Ethernet
After RUN, ON for 1 scan
Axis No.
Axis No.