Mitsubishi Electric MELSEC iQ-F Series - Adding the FB Library

5 CREATING PROGRAMS
5.2 Adding the FB Library
40
5
5.2 Adding the FB Library
This section describes how to add the function blocks (FBs) in the FB library to the project.
1. Select [MotionControl_CCLinkIEFBasic_F]  [FB]  [Operation-Individual] in the FB library. From [Operation-Individual],
select an FB to be added and right-click on it, then select [Add to Project]  [Create FB File]. When repeating it to add
two or more FBs, select [Add to Project]  [FBFILE].
[FBs to be added]
• MC_Power_CCLinkIEFBasic_F
• MCv_Home_CCLinkIEFBasic_F
• MC_MoveRelative_CCLinkIEFBasic_F
2. The FBs will be added to [FBFILE] of [FB/FUN].
Right-click
Select FBFILE when adding the second FB or later.