Mitsubishi Electric MELSEC iQ-F Series - Local Labels; How to Set Local Labels

41
5 CREATING PROGRAMS
5.3 Local Labels
5.3 Local Labels
Set local labels to use for the programs.
How to set local labels
1. In the "Navigation" window, select [Program]  [Scan]  [MAIN]  [ProgPou]  [Local Label]. Double-click [Local
Label].
2. Set the local labels as shown below. For how to input the label name, class, and comment (English), refer to Page
30 Addition of global labels 1.
Label Name Data Type Class English
PowerStatus Bit (1..2) VAR Ready to operate status
PowerErrorID Word [Unsigned]/Bit String [16-bit] (1..2) VAR Error code
Distance Double Word [Signed] (1..2) VAR Movement amount
Double-click
Click
Click [Detailed Display].
*1