64
3 EtherNet/IP Configuration Tool
3.1 Window Structure
■[Port Configuration] tab
Read and write the connection status of the EtherNet/IP device.
This tab can be used when the "Online Action" window is displayed with an EtherNet/IP device selected.
Item Description
[Get Values from Device] button Reads and displays the connection status of the EtherNet/IP device.
Physical Interface Instance Specifies the port number from the list when the EtherNet/IP device is configured with multiple ports.
[Refresh] button Updates the port number of the "Physical Interface Instance".
Set Part of Values Selects the items of the values to write to the EtherNet/IP device from the following.
• General Parameters: Basic parameter settings
• TCP/IP Parameters: TCP/IP parameter settings
• Device Name: Device name settings
• Physical Interface: Physical interface settings
[Set Values to Device] button Writes the values of the items selected with "Set Part of Values" to the EtherNet/IP device.
[Set All Values to Device] button Writes all the values of the displayed connection status to the EtherNet/IP device.
Description Displays the description of the selected item.
[Set Chassis Size in the Device] button Sets the number of modules to be mounted to the slice-type EtherNet/IP device.
Writing the specified number of modules enables error detection when the specified number is different
from that of the actual system or when an error occurs on the module.
To Next Page
Loading...
