3 EtherNet/IP Configuration Tool
3.1 Window Structure
91
3
For setting windows other than the above, refer to the following.
Page 75 EtherNet/IP device setting window (Class1 instance communications)
Output - O->T Output Size Specifies the size of the output data. (Fixed to 0.)
Output Mode Specifies the target to which the output data is written. (Fixed to Point to
Point.)
• Point to Point: Unicast (one to one) communications are performed.
Output Type Specifies the output type according to the size of the output data. (Fixed to
Fixed.)
• Fixed: Communications are performed with a fixed size.
Priority Specifies the priority of the communication packet for the currently set
connection. (Fixed to Scheduled.)
• Scheduled: Packets are processed in the receiving order regardless of
priority.
Request Packet
Interval(RPI)
Specifies the communication cycle. (Unit: ms) 0.5 to 60000
(Default: 100)
Item Description Setting range
To Next Page
Loading...
