7 - 148 7 - 148
MELSEC-Q
7 APPLICATION FUNCTIONS
POINT
(1) Communication by LX/LY is not supported by the pairing setting.
(2) Set the refresh target devices of LB/LW set in the host station send range of the
redundant system as tracking devices. For details, refer to the QnPRHCPU User's
Manual (Redundant System).
(3) When tracking a link special relay and a link special register, exercise care not to
transfer the link special relay (SB0020 to SB01FF) and the link special register
(SW0020 to SW01FF) in use by the system.
To Next Page
Loading...
