Mitsubishi Electric MELSERVO-J4 MR-J4 A Series - Page 198

6. NORMAL GAIN ADJUSTMENT
6 - 11
(c) One-touch tuning execution
ᱛࠪࡦࡏ࡞⴫␜
ߣࠛ࡜࡯ࠦ࡯࠼
"C 000"(⺞ᢛࠠࡖࡦ࠮࡞)ࠍ2s㑆㓒ߢߦ
⴫␜ߒ߹ߔޕ
2s㑆㓒
ࠛ࡜࡯ࠦ࡯࠼
ࡢࡦ࠲࠶࠴⺞ᢛࡕ࡯࠼ߦ⒖ⴕߒߚ⁁ᘒ
ߢ㧘ߤߩ㗄⋡ࠍ⴫␜ߒߡ޿ߡ߽
"SET"ࡏ࠲ࡦࠍ᛼
ߔߣࡢࡦ
࠲࠶࠴⺞ᢛࡕ࡯࠼ࠍᱛ
ߔࠆߎߣ߇ߢ߈߹ߔޕ
ᱛࠪࡦࡏ࡞
⴫␜
ೋᦼ↹㕙
"SET"ࡏ࠲ࡦࠍ᛼ߔߣ㧘ೋᦼ↹㕙
ߦㆫ⒖ߒ߹ߔޕ
(d) If an error occur
ᧄ㗄(1)(d)ߩ⴫6.2ࠍෳᾖߒߡ㧘ࠛ࡜࡯ߩේ࿃ࠍ⏕⹺ߒߡߊߛߐ޿ޕ
2s㑆㓒
ࠛ࡜࡯ࠦ࡯࠼
ࡢࡦ࠲࠶࠴⺞ᢛߦࠛ࡜࡯߇⊒↢ߒߚ႐ว㧘ࡢࡦ࠲࠶࠴⺞ᢛࠍ⚳ߒ㧘ᱛࠪࡦࡏ࡞ߣ"C 001"㨪
"C 00F"߹ߢߩࠛ࡜࡯ࠦ࡯࠼ࠍ2s㑆㓒ߢߦ⴫␜ߒ߹ߔޕ
ᱛࠪࡦࡏ࡞⴫␜
ೋᦼ↹㕙
"SET"ࡏ࠲ࡦࠍ᛼ߔߣ㧘ೋᦼ↹㕙ߦㆫ⒖ߒ߹ߔޕ
(e) If an alarm occur
ࡢࡦ࠲࠶࠴⺞ᢛߦࠕ࡜࡯ࡓ߇⊒↢ߒߚ႐ว㧘ࡢࡦ࠲࠶࠴⺞ᢛࠍᱛߒ㧘ࠕ࡜࡯ࡓ⴫␜ߦㆫ⒖ߒ
߹ߔޕ
ࡢࡦ࠲࠶࠴⺞ᢛ
ࠕ࡜࡯ࡓ⴫␜
Stop symbol
2 s interval
Pushing the "SET" button will switch to the initial screen.
Initial screen
The one-touch tuning mode can be stopped by pushing the "SET" button regardless of displayed
item.
The stop symbol and error code "C 000" (cancel during tuning) will be displayed by turns with 2
s interval.
Error code
Stop symbol
If an error occurs during the one-touch tuning, the tuning will be forcibly terminated and the stop
symbol and error code from "C 001" to "C 00F" will be displayed by turns with 2 s interval.
2 s interval
Error code
Initial screen
Check the error cause referring table 6.2 of (1)(d) of this section.
Pushing the "SET" button will switch to the initial screen.
One-touch tuning in progress
A
larm display
If an alarm occurs during tuning, one-touch tuning will be forcibly terminated and the alarm No.
will be displayed.