24
4 SYSTEM CONFIGURATION
4.1 Applicable Systems
4 SYSTEM CONFIGURATION
This chapter describes system configuration using an IO-Link module.
For CC-Link IE Field Network configuration, refer to the following.
User's manual for the master/local module used
4.1 Applicable Systems
Applicable master station
When using an IO-Link module, use the following products as a master station.
*1 Simple motion modules and interface boards compatible with the CC-Link IE Field Network cannot be used.
Information on "Applicable master station" described above is the ones at the point when this manual was issued.
For latest information, please visit the website of CC-Link Partner Association.
www.cc-link.org
(1) Personal computer (engineering tool/FDC)
Model
*1
First five digits of serial number
RJ71GF11-T2 No restriction
RJ71EN71
R04ENCPU, R08ENCPU, R16ENCPU, R32ENCPU, R120ENCPU
QJ71GF11-T2
LJ71GF11-T2
NZ2GF2S-60IOLD8
(1)
DeviceDTM
M_CommDTM-IOLink
IODD DTM Configurator
IODD
To Next Page
Loading...
