96
7 FUNCTIONS
7.5 Event Acquisition Function
7.5 Event Acquisition Function
This function notifies of IO-Link device events upon sending of event data from the IO-Link device to the IO-Link module.
As with the IO-Link module event history, the event history can be checked using "Command Execution of Slave Station".
( Page 132 Method for Checking the Event History)
The event acquisition function handles the following two items.
• Notification
• Warning
All types of abnormalities are acquired as errors.
Notification
Set the IO-Link device events set as notification as follows for each channel.
• Not acquire
• Acquire as event
Warning
Set the IO-Link device events set as warning as follows for each channel.
• Not acquire
• Acquire as event
• Acquire as error
Setting method
1. Open the "CC IE Field Configuration" window.
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Basic Settings] [Network
Configuration Settings]
2. Open the "Parameter Processing of Slave Station" window.
From the list of stations, select an IO-Link module [CC IE Field Configuration] [Online] [Parameter Processing of
Slave Station].
3. Set "Method selection" to "Write Parameters".
4. Set "Event Retrieval Setting".
Item Setting details
Event Retrieval Setting Notifications • 0: Do not retrieve (Default value)
• 1: Retrieve as events
Warnings • 0: Do not retrieve
• 1: Retrieve as events (Default value)
• 2: Retrieve as errors
To Next Page
Loading...
