66
7 FUNCTIONS
7.1 IO-Link Master Functions
IO-Link transient communication function
This function reads/writes IO-Link device parameters from/to the IO-Link device connected to each channel.
Also, this function reads/writes any IO-Link device parameters using the module FB or FDC.
Page 67 IO-Link device setting automatic upload/download function
Page 186 IO-Link device parameter manual upload command
Page 186 IO-Link device parameter manual upload completed
Page 54 IO-Link Device Parameter Setting
CC-Link IE Field Network Remote IO-Link Module Function Block Reference (For MELSEC iQ-R)
To Next Page
Loading...
