Mitsubishi Electric NZ2GF2S-60IOLD8 - Swap Function

76
7 FUNCTIONS
7.1 IO-Link Master Functions
Swap function
This function swaps the upper and lower bytes of data sent and received between the IO-Link module and the IO-Link device
connected to each channel.
With this function, there is no need to program an operation to swap the upper and lower bytes when using an IO-Link device
that handles the upper and lower bytes in reverse.
Ex.
When the swap function is enabled
(1) Structure of IO-Link device input process data
(2) CPU module device
(3) Input process data (1st word)
(4) Input process data (2nd word)
byte0
b7 b6 b5 b4 b3 b2 b1 b0
Alarm
byte1
b7 b6 b5 b4 b3 b2 b1 b0
byte2
(1)
(2)
(3)
(4)
b7 b6 b5 b4 b3 b2 b1 b0
b15
...
b0
b15
...
b0
MSB LSB
Parameter Measured value
Measured value
LSB
Measured value
Measured value
Alarm
MSB
Parameter Measured value
Measured value