Mitsubishi Electric Q170MSCPU-S1 - 2.4 24 VDC Power Supply Connector; 2.5 Forced Stop Input Connector

21
2.4 24VDC Power Supply Connector
24VDC power supply is supplied from the 24VDC power supply connector of the front face of
the Motion controller.
The pin layout of the 24VDC power supply connector
The pins layout (from front view) and connection of the 24VDC power supply connector is
shown below.
Applicable connector model name
• FKC2.5/3-ST-5.08 connector (PHOENIX CONTACT make) (Attachment)
Conductor size for power line
• 0.3 to 2.5mm
2
(AWG12 to AWG22)
2.5 Forced Stop Input Connector
The pin layout of the forced stop input connector
The pins layout (from front view) and connection of the forced stop input connector is shown
below.
*1 Do not connect anything to the terminals listed as "No connect".
Applicable connector model name
• FK-MCP1.5/3-ST-3.81 connector (PHOENIX CONTACT make) (Attachment)
Conductor size for power line
• 0.3 to 1.5mm
2
(AWG16 to AWG22)
Pin layout Pin No. Signal name
124V(+)
224G
3FG
Pin layout Pin No. Signal name
3EMI.COM
2 No connect
*1
1EMI
1
2
3
3
2
1