1 - 2
1 OVERVIEW
REMARK
For information about each module, design method for program and parameter,
refer to the following manuals.
Item Reference Manual
PLC CPU area, peripheral devices for PLC program design,
I/O modules and intelligent function module
MELSEC-Q series PLC Manuals,
Manual relevant to each module
Operation method for MT Developer2 Help of each software
SV13/SV22
• Multiple CPU system configuration
• Performance specification
• Design method for common parameter
• Auxiliary and applied functions (common)
Q173D(S)CPU/Q172D(S)CPU Motion controller
Programming Manual (COMMON)
• Design method for Motion SFC program
• Design method for Motion SFC parameter
• Motion dedicated PLC instruction
Q173D(S)CPU/Q172D(S)CPU Motion controller
(SV13/SV22) Programming Manual (Motion SFC)
• Design method for positioning control
program in the real mode
• Design method for positioning control
parameter
Q173D(S)CPU/Q172D(S)CPU Motion controller
(SV13/SV22) Programming Manual (REAL MODE)
SV22
(Virtual mode)
• Design method for mechanical system
program
Q173D(S)CPU/Q172D(S)CPU Motion controller (SV22)
Programming Manual (VIRTUAL MODE)
SV22
(Advanced
synchronous
control)
• Design method for synchronous control
parameter
Q173DSCPU/Q172DSCPU Motion controller (SV22)
Programming Manual (Advanced Synchronous Control)
To Next Page
Loading...
