Mitsubishi Electric Q173CPUN - Operating Procedure of ROM Writing

10 - 10
10 ROM OPERATION FUNCTION
10.4 Operating Procedure of "ROM writing"
The operating procedure of ROM writing using the SW6RN-GSV43P is shown below.
System setting screen
1) Display "ROM/RAM" communication dialog
screen after clicking on "Communication" -
"Transfer" of the system setting menu screen.
(Note) : Select "Transfer" at the ROM writing.
RAM/ROM(M)
RAM(T)
ROM(R)
POINT
Be sure to write the all data beforehand to the RAM of
Motion CPU at the ROM writing.
Operating procedure
"When selecting the RAM." (Default screen at "Transfer" selecting.)
"When selecting the ROM." (ROM writing window)
2) Click on "ROM" of "RAM/ROM" menu screen.
Write the programs and data in the RAM of Motion
CPU to the ROM.
(Note) : At "RAM" clicking on
Communication dialog is left screen (When
selecting the RAM).
Read, write and verify to the RAM of Motion
CPU.
Write the all data to Motion CPU after
clicking on "RAM" at the ROM writing.
4) Select "Write" of "When selecting the ROM" screen.
(Note) : ALL data are batch-written at the ROM
writing.
Not select these items.
3) "RAM/ROM" communication dialog is left screen
(When selecting the ROM.).