7 - 49
7 MOTION PROGRAMS FOR POSITIONING CONTROL
7.13 G-code
This section describes instruction codes to use in the Motion program.
Each instruction is described in the following format.
1)
2)
The method of the input and
description are shown.
" " shows that space should be
put when the program is input.
Functional outline of instruction
explained easily.
5)
6)
3)
4)
No. Description No. Description
1) Name of the instruction code. 4) Indicates the parameters related to this instruction.
2) Indicates the model name. 5) Indicates a program example which uses this instruction.
3) Indicates the detailed explanation or precautions.
6)
Indicates supplementary explanation or instructions related to
this instruction.
To Next Page
Loading...
