Mitsubishi A User Manual

α
Simple Application Controllers
vii
Guidelines for the safety of the user and protection of AL-PCS/WIN-E
This manual provides information for the use of AL-PCS/WIN-E. The manual has been written
to be used b
y
trained and competent personnel. The definition of such a person or persons is
as follows;
a
)
An
y
en
g
ineer who is responsible for the plannin
g
, desi
g
n and construction of automatic
e
q
uipment usin
g
the product associated with this manual should be of a competent
nature, trained and
q
ualified to the local and national standards re
q
uired to fulfill that
role. These en
g
ineers should be full
y
aware of all aspects of safet
y
with re
g
ards to auto-
mated e
q
uipment.
b
)
An
y
commissionin
g
or service en
g
ineer must be of a competent nature, trained and
q
ualified to the local and national standards re
q
uired to fulfill that
j
ob. These en
g
ineers
should also be trained in the use and maintenance of the completed product. This
includes bein
g
completel
y
familiar with all associated documentation for the said prod-
uct. All maintenance should be carried out in accordance with established safet
y
prac-
tices.
c
)
All operators of the completed e
q
uipment should be trained to use that product in a safe
and co-ordinated manner in compliance to established safet
y
practices. The operators
should also be familiar with documentation which is connected with the actual operation
of the completed e
q
uipment.
Note :
the term ‘completed e
q
uipment’ refers to a third part
y
constructed device which con-
tains or uses the product associated with this manual.
Notes on the symbology used in this manual
At various times throu
g
h out this manual certain s
y
mbols will be used to hi
g
hli
g
ht points of
information which are intended to ensure the users personal safet
y
and protect the inte
g
rit
y
of
e
q
uipment. Whenever an
y
of the followin
g
s
y
mbols are encountered its associated note must
be read and understood. Each of the s
y
mbols used will now be listed with a brief description of
its meanin
g
.
Hardware warnings
1
)
Indicates that the identified dan
g
er
WILL
cause ph
y
sical and propert
y
dama
g
e.
2
)
Indicates that the identified dan
g
er could
POSSIBLY
cause ph
y
sical and propert
y
dama
g
e.
3
)
Indicates a point of further interest or further explanation.
Software warning
4
)
Indicates special care must be taken when usin
g
this element of software.
5
)
Indicates a special point of which the user of the associated software element
should be aware.
6
)
Indicates a point of interest or further explanation.

Mitsubishi A Specifications

General

Brand	Mitsubishi
Model	A
Category	Controller
Language	English