Mitsubishi ASX 2019

Multi-information meter
switch
Each time the multi-information meter switch
is operated, a sound is emitted and the multi-
information display changes between infor-
mation such as warnings, odometer (Type 1),
tripmeter, service reminder, engine coolant
temperature (Type 1), average and momenta-
ry fuel consumption, driving range, and aver-
age speed.
It is also possible to change elements such as
the language and units used on the multi-in-
formation display by operating the multi-in-
formation meter switch.
mark display screen (when
the ignition switch or the oper-
ation mode is OFF)
If you press the multi-infor-
mation meter switch and re-
turn from the warning dis-
play screen to the previous
screen, the
mark is dis-
played.
Refer to “To return to the screen displayed
before the warning display” on page 5-07.
This mark is also displayed if there is another
warning other than the one displayed. When
the cause of the warning display is elimina-
ted, the
mark goes out automatically.
NOTE
l
When the mark is displayed, the warning
display screen can be redisplayed on the in-
formation screen.
Refer to “Information screen (when the igni-
tion switch or the operation mode is OFF)”
on page 5-05.
Refer to “Information screen (when the igni-
tion switch or the operation mode is ON)”
on page 5-10.
Information screen (when the
ignition switch or the operation
mode is OFF)
Each time you lightly press the multi-infor-
mation meter switch, the display screen
switches in the following order.
Type 1
Type 2
When there is no
warning display
When there is a
warning display
When there is no
warning display
When there is a
warning display
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
Multi-information display
5-05
OGAE19E1
Instruments and controls
5