The distance and speed units are also switch-
ed in the following combinations to match
the selected fuel consumption unit.
Fuel con-
sumption
Distance
(driving
range)
Speed
(average
speed)
L/100 km km km/h
mpg (US) mile(s) mph
mpg (UK) mile(s) mph
km/L km km/h
Changing the temperature unit
The display unit for temperature can be
switched.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “ ” (temperature
unit setting).
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from °C →
°F → °C.
The setting is changed to the selected
temperature unit.
NOTE
l
If the battery is disconnected, the unit setting
is erased from memory and is automatically
set to °C.
Changing the display language
The language of the multi-information dis-
play can be switched.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “LANGUAGE” (lan-
guage setting).
Multi-information display
5-22
OGAE19E1
Instruments and controls
5
To Next Page
Loading...
