12-7
3 Lowering the cab
1. Release the stopper and retain it in the clip .
2. Hold the tilt grip to support the cab. Lift the lock
lever and fold the cab stay .
3. Still holding the tilt grip , lower the cab until the
hook on lever C engages with the cab mount
.
WARNING
• Be careful not to trap your hands or other
body parts.
• Before lowering the cab, make sure that
you have not left rags, tools, etc. in the
engine compartment. Flammable objects
left inside the engine compartment can
cause fires.
• The cab could come down too quickly if
there are heavy objects inside or on the
roof deck. Always lower the cab slowly
while supporting it.
• Hold the cab tilt grip when lowering the
cab. Holding the lever B or any other part
when lowering the cab could result in
damage.
• When you have unlocked the cab stay,
move your hands away from the lever. The
cab stay will tip toward the rear of the vehi-
cle, so your hands could otherwise get
trapped.
Z10675
Z10676
Z10677
FEFG.book Page 7 Thursday, March 10, 2005 7:30 PM
To Next Page
Loading...
Need help?
General
