Multi-information meter switch
E00520000480
Each
time the multi-information meter switch is op-
erated, a sound is emitted and the multi-informa-
tion display changes between information such as
warnings, service reminder, average and momenta-
ry fuel consumption, driving range, average speed,
and S-AWC (Super-All Wheel Control) operation
display.
It is also possible to change elements such as the
language and units used on the multi-information
display by operating the multi-information meter
switch.
“!” mark display screen (when
the ignition switch is “OFF”)
E00520100465
If
you press the multi-information meter
switch and return from the warning dis-
play screen to the previous screen, the
“!” mark is displayed.
Refer to “To return to the screen dis-
played before the warning display” on
page 3-06.
This mark is also displayed if there is an-
other
warning other than the one dis-
played. When the cause of the warning
display is eliminated, the “!” mark goes
out automatically.
NOTE
l
When the “!” mark is displayed,
the warning display screen can be
redisplayed on the information
screen.
Refer to “Information screen
(when the ignition switch is
“OFF”)” on page 3-05.
Refer to “Information screen
(when the ignition switch is
“ON”)” on page 3-08.
Information screen (when the ignition
switch is “OFF”)
E00520200671
Each
time you lightly press the multi-information
meter switch, the display screen switches in the fol-
lowing order.
1-
Tripmeter
2-
Tripmeter
3- Service reminder
4-
Redisplay of a warning display screen
Odometer/Tripmeter
E00521201617
Each time you lightly press the multi-information
meter switch, the display screen switches.
Odometer/Tripmeter
→ Odometer/Tripmeter
→ Service reminder → Redisplay of a warning
display screen → Odometer/Tripmeter
Instruments and controls
3-05
3
To Next Page
Loading...
