Mitsubishi MELSEC-F FX3U Series User Manual

D-3
1 Outline
1.1 Outline of Functions
FX 3U /FX 3UC Series PLC User's Manual - Analog Control Edition
FX3U-4DA-ADP (4-channel analog Output)
A
Common Items
B
FX
3UC
-4AD
C
FX
3U
-4AD-ADP
D
FX
3U
-4DA-ADP
E
FX
3U
-4AD-PT
-ADP
F
FX
3U
-4AD-TC
-ADP
G
PID Instruction (FNC 88)
1. Outline
This chapter describes the outline of FX3U-4DA-ADP (referred to as 4DA-ADP).
1.1 Outline of Functions
FX3U-4DA-ADP is an analog special adapter. Connect FX3U-4DA-ADP to the FX3U/FX3UC Series PLC to
output the voltage/current data of 4 channels.
1) Up to 4 units of 4DA-ADP can be connected to the PLC.
(Including other analog special adapters).
2) Either "voltage output" or "current output" can be specified for each channel.
3) D/A output is automatically by the special data register value in FX
3U/FX3UC Series PLCs.
Number of connectable
units
……
For a detailed
description of wiring,
refer to Chapter 3.
……
To check the model
number of the connectable
PLC, refer to Section 1.3.
Point and section to be
referred to
System
……
Special devices
……
For a detailed description
of special devices, refer to
Chapter 4.
For a detailed description
of a basic program, refer to
Section 4.8.
Analog data
Refer to the system configuration shown in the User's Manual - Hardware Edition to check the number of connectable units
and to determine the entire system.
4 adapters, maximum (including other
analog special adapters)
1st adapter
M/D8260 to M/D8269
M/D8270 to M/D8279
M/D8280 to M/D8289
M/D8290 to M/D8299
2nd adapter
3rd adapter
4th adapter
+
+
Expansion
board
FX 3U /FX 3UC Series PLC
Inverter, etc.
4th
adapter
3rd
adapter
2nd
adapter
1st
adapter
Contents
Output mode
switching
Output setting data
Error status
Transfer direction

Mitsubishi MELSEC-F FX3U Series Specifications

General

Brand	Mitsubishi
Model	MELSEC-F FX3U Series
Category	Controller
Language	English